Larger Batches of High Q-Factor Dielectric Resonators
Exxelia can now produce larger batches of its E7000 series for increased cost-effectiveness. Designed for high-end filters where Q-factor is critical, especially in space or military applications, the E7000 series of dielectric resonator features tremendous properties.
Dielectric resonators are designed to replace resonant cavities in microwave functions such as filters and oscillators. Exxelia with the support of ESA and CNES developed the E7000 series that provides a narrow bandwidth with smaller size. E7000 is Ba-Mg-Ta materials based that combines an ultra-high Q-factor and the possibility to get all the temperature coefficients upon request. E7000 features the high-performance requested for space use in the frequency range from 5 to 32 GHz, and guarantees up to Qxf > 250 000 at 10GHZ.
Being one of the few manufacturers producing its own raw materials, Exxelia perfectly masters the production of dielectric resonators. Induced by the success of this new range, the company is now able to provide larger batches (up to 20kg of powder) of its E7000 series while keeping the exact same product properties, resulting in opportunities for cost-effective volume fabrication.
Typical applications for the E7000 series: Satellite multiplexing filter devices, radio links for communication systems (LMDS), military radars.
Film capacitor series keeps its cool even at 150°C
The Exxelia Dearborn 880P series of metalised Polyphenylene Sulfide (PPS) Film Capacitors is designed to keep cool when things get hot. With an operating temperature range of -55 to +150°C, they experience no derating for DC operations and none in AC operations up to +125°C. This enables them to function at full capacity in extreme heat applications. The ability to operate at such high temperatures can eliminate the need for a cooling system within the design, thus reducing overall design time, weight and space. PPS is a high-temperature, low-loss dielectric film used in the 880P series of wrap-and-fill capacitors. This allows them to feature superior electrical characteristics over an extremely wide temperature range and maintain excellent capacitance stability in one rugged, lightweight package. It performs consistently well in commercial applications such as in power supplies and in more demanding applications, such as in avionics, on a congested control or instrumentation panel. The series features a capacitance range of 0.0047 to 10.0µF and voltage ratings from 50 to 400VDC with precision tolerances as low as ±¼% through ±10% yielding greater accuracy of capacitance. It is also a customisable unit with voltage maximums of 700 – 800VDC at 125°C maximum (higher voltages are available at reduced capacitance). Made in the USA, the units are highly durable and capable of withstanding a five-pound pull force on lead axis. They are non-polar and demonstrate low loss factor, good voltage breakdown strength and high insulation resistance (low leak current) – and are completely stable over normal temperatures, voltages and frequency ranges. These characteristics allow the 880P series capacitors to deliver high performance in a variety of applications such as DC timing circuits, low- to high-frequency AC applications, and pulse or energy discharge uses. Additionally, the package has axial leads with moisture-resistant, flame-retardant epoxy end seals and an outer tape covering for maximum performance.
Exxelia acquires Deyoung MFG., INC.
“The DMI acquisition directly supports our Magnetics SBU expansion strategy. DMI’s strategic location in the Pacific Northwest aerospace market provides a key geographic location for driving growth and profitability,” said François Vignaud, Exxelia Magnetics’ SBU VP. “DMI is highly regarded for the quality of its products and the operational performance of its organization. DMI products can be found on most major commercial aerospace platforms, supporting in flight power, lighting and entertainment sub-systems.” “We welcome DMI into the Exxelia Group,” said Exxelia USA President Michael Thomas. “During its 40-plus years in business, DMI has built solid customer relationships with a strong brand reputation in the aerospace, medical and other high-reliability magnetics markets. Acquiring DMI creates the potential for both revenue and cost synergies related to cross selling and procurement savings as we leverage Exxelia Group’s broader global supply chain and operational excellence practices to support DMI’s operations.” According to Martin DeYoung, President & CEO of DMI, “We are excited to now be a part of Exxelia’s growth and expanded product offerings. The DeYoung’s recognized a shared business culture driven by a passion for quality and customer loyalty. By joining Exxelia Group we achieve a goal of meeting our strategic growth objectives while protecting our long standing relationships with our key aerospace customers and their contract manufacturers.” “This acquisition addresses our aerospace customers increasing requirements for global manufacturing access and timely support” stated Eric DeYoung, VP of Operations at DMI. “Together, we have global reach with the capability to serve our customers – whatever their size, location, or aerospace industry sector with one of the most comprehensive and competitive groups of design and manufacturing capabilities.”